Tag Archives: Camera Connection Diagnostics

exacqVision 7.8 Release Enables Direct Archive Search and Introduces Camera Connection Diagnostics

exacqVision 7.8, the latest release of exacqVision video management system (VMS) software, is now available from Exacq.

Software Downloads

Watch this video to see the exacqVision complete security solution and new features.

exacqVision 7.8 highlights:


Direct Archive Search

Direct Archive SearchexacqVision 7.8 enhances video archiving to provide faster access to video and better manage bandwidth. Users closer to the archive location on the network can directly search video on the archive without routing data through the recorder. Direct archive search is available for any exacqVision S-Series storage device and any third-party network share archive.

For customers that want to implement mobile video on vehicles such as trains, subways, and buses, exacqVision Edge+ VMS software on a camera can be used in combination with direct archive search to send video to the archive while at the station and view video from the archive while the vehicle is on duty.

Direct archive search can be enabled for exacqVision Professional and Enterprise users. To enable direct archive search, users can go to the Archiving page and select the enabled check box under the new Direct Search section and enter read-only username and password credentials that the client will use to access the network share.


Camera Connection Diagnostics

exacqVision will now provide guidance on all camera connections to resolve and troubleshoot camera connections faster. The new camera diagnostic information will reduce common technical support questions.

exacqVision_Camera_Diagnostics

Under IP Camera Information there is a new Troubleshooting Steps field that gives specific instructions to support connection scenarios for any camera manufacturer and model. Connection Diagnostics and descriptions include:

  • Different Subnet – IP of camera is on a different subnet and may not be reachable.
  • Duplicate IP – Device with the same IP address is already in the list
  • Wrong IP – Device of the same type was discovered at a different IP
  • Type Mismatch – Device of a different type discovered at the same IP
  • Bad Credentials – Camera is rejecting the username or password


Hard Disk Drive Serviceability

exacqVision will automatically run disk health checks for proactive notification when a NVR hard drive may fail.

HDD-Serviceability

On the Storage page under the Hardware tab, users can find the storage hardware disks. exacqVision will show a green check mark or red X indicating if the disk has failed or a HDD failure is impending.. Users can perform a self-test for a single disk or for all disks by clicking one of the two buttons: ‘start short test’ which typically takes seconds or ‘start long test’, which may take a few hours to complete. The status line under the properties section will display the drive failure and notify the user if a drive needs replaced. This feature is available exclusively on exacqVision network video recorders.


Bandwidth Control

exacqVision Professional and Enterprise users can configure bandwidth limitations to certain IP ranges and during specific hours to optimize traffic. Bandwidth can be customizable down to the Kbps or Mbps for greater control.

Bandwidth can be limited for:Bandwidth-Configuration

  • All Remote Client Access – affects all client traffic out of the recorder
  • WAN Client Access – affects all traffic on a different subnet
  • Defined IP Ranges – affects only the defined IP ranges

Bandwidth can be scheduled for specific days and start and end times. By default, it will be set to Everyday, All Day. For example, in retail applications, users may want to schedule WAN bandwidth restrictions around business hours so lines for credit cards can be used and during closed hours the bandwidth opens up.


MP4 Crop Export

exacqVision users can now export video files to MP4. Along with the new MP4 export feature, exacqVision provides users with the ability to crop the scene, add a subtitle and time stamp to any .EXE, .MOV or .MP4 video file.The ability to crop a scene gives users greater flexibility to meet privacy standards. In schools, administrators can crop the video event footage down to only include the necessary students involved instead of including the entire scene of students, which may violate privacy regulations.

exacqVision_mp4_export_cropping

Users can select the new scissors icon and draw a box around a specific area they would like to crop for the export, allowing them to focus on the necessary area of the event. The cropped image will add a black border with yellow text stating “cropped from original video” to the bottom of the exported file. Watermark authentication is also supported for .exe export.

Users can export files larger than 4GB. Files can still be exported as .exe, .avi and .mov in addition to the new .mp4 format.


Web Service Dashboard

The redesigned web service configuration page now displays performance and connectivity status in a new dashboard for convenient connection monitoring. The page now offers guidance and live status of server workloads and connected users. An easy to read, real-time graphic shows the current CPU and memory usage, the number of connected users and camera streams they are viewing. For further detail, the number of streams being transcoded is shown. The blue section indicates how much the web service is using and the dark gray shows how much the machine is using in total. Within a glance, users can see if the web service is encountering a high level of load. If there is a high number of users or high memory usage, it may be necessary to add hardware to improve performance.

exacqVision_WebConfigurationPage

Additionally, this page will provide guidance on connectivity:

  • Outbound Internet Connection -Confirms the web server can reach the Internet
  • Inbound Internet Connection – Confirms the Internet can reach the web server
  • Internet Address – Confirms the external IP or URL that users will enter into Exacq Mobile

Web-Service-Administration


Exacq Mobile Event List Search

Quickly find and review video associated with POS, access control and other events from your mobile app in a new list search format.

By clicking the search icon in the upper right hand corner of the app and selecting custom, a search details box will appear. Users can select the specific start/end time and up to 4 cameras to search on. Similar to the exacqVision client list search, Exacq Mobile allows users to view a thumbnail of each event and review events individually in a list. Double click or touch any of the results to view the timeline view of the specific event. Users can closely review events quickly to ensure nothing was missed in any of the scenes.

ListSearch_exacqMobile


Enterprise System Manager (ESM) License Management

Administrators can now backup and store server licenses directly from ESM. The new functionality allows administrators to easily import, export and save a large number of server licenses and view license expiration dates. On the server details page, users can select the calendar icon to save configuration, change configuration, update software or import license file. This gives ESM administrators the ability to manage all licenses for recorders monitored on the system.
Note: This feature will be released within the coming weeks.

Enterprise System Manager_License_Managment


IP Camera Integrations

We have added support for more than 90 new IP camera models in the exacqVision 7.8 release and updated over 400 new test records. exacqVision now supports nearly 3,000 IP cameras.


IllustraIllustra

  • IPS02D2ISBIT
  • IPS02D2ICBIT
  • IPS02D2ICBTT
  • IPS02D2ISBTT
  • IPS02D2ISWTT
  • IPS02D2ICWTT
  • IPS02D2OCBTT
  • IPS02D2OCBIT
  • IPS02D2ISWIT
  • IPS02D2OCWIT
  • IPS02D2OSBTT
  • IPS02D2OSBIT
  • IPS02D2ICWIT
  • IPS02D3ICWTT
  • IPS02D3ISWTT
  • IPS02D3ICWIT
  • IPS02D3ICBTT


AXISAxis Communications

  • M3044
  • M3045
  • M5013-V PTZ
  • M5014-V PTZ
  • Q8721-E
  • Q8722-E
  • M3037 client-side dewarping
  • Tampering and analytic events supported on metadata only devices

Arecont VisionArecont Vision

  • AV12276DN-NL/08/28
  • AV20275DN-NL/08/28
  • AV12586PM
  • AV1115DN(AI)v1
  • AV2115DN(AI)v1
  • AV2116DNv1
  • AV3115DN(AI)v1
  • AV5115DN(AI)v1
  • AV10115DN(AI)v1
  • Support for corridor view 90/270

PanasonicPanasonic

  • WV-SFN130
  • WV-SFN110
  • WV-SFV130
  • WV-SFV110
  • Client-side dewarping for WV-SFN480

GanzGanz

  • ZN-DNT352XE-MIR

BoschBosch

  • Autodome IP 7000 HD
  • Updates on how motion data is received

SamsungSamsung

  • SNP-6321

SonySony

  • Initial support for Sony Gen7 cameras

ACTiACTi

  • Updated driver for better support on I/Q/E/B/D models

HikVision

Hikvision

  • DS-2DE5220I-AE
  • DS-2DF6336V-AEL
  • DS-2CD4185F-I(Z)
  • DS-2DE5174-AE

VivotekVivotek

  • FE8182
  • FD836B-HTV
  • FD8138-H
  • FD8381-EV
  • FD8181

OnvifONVIF Integrations

  • W Box
  • Milesight
  • Hunt Electronic
  • OpenEye


New IntegrationsSensormatic-Synergy-Series-integration

  • Sensormatic Synergy Series electronic article surveillance (EAS) system integration to improve loss prevention within one interface
  • Selea License Plate Recognition

Download and Installation

The latest versions of exacqVision client and server software can easily and quickly be copied over existing versions while retaining all user settings. The latest versions are available through “Check for Updates” in the “About” box in the exacqVision software.
exacqVision Server software is available in both Windows and Linux versions, and the exacqVision client software is available in Windows, Linux and Macintosh native versions. Any version of exacqVision client can connect to any version of exacqVision server.
exacqVision 7.8 is available for download here.
Try exacqVision software for free here: http://exacq.com/try