IP-ACM v2 Ethernet Door Module for a More Secure Access Control Option

IP-ACM v2 is the latest version of the IP-ACM Two-Reader Ethernet Door Module, enhancing the original IP-ACM by providing a secondary Ethernet port to connect an additional network device such as a biometric reader on the same LAN segment. The maximum lock output amperage has been increased to 0.75A per lock, allowing the IP-ACM to directly power a wider range of locking devices, plus, the output connector size has increased, for easier installation. In addition, IP-ACM v2 now supports 801.1X and TLS 1.2 secure network protocols for added protection against the threat of cyberattacks.

Like its predecessor, the IP-ACM v2 enables a pure IP edge-based access control architecture. IP-ACM acts as the interface between the local field wiring/devices and the IP network, communicating to iSTAR Ultra and iSTAR Ultra SE door controller GCM or iSTAR Ultra LT for all access decisions.

IP-ACM utilizes a customer’s network infrastructure to reduce installation costs, requiring just a single Cat 5/6 cable to each door. IP-ACM also offers compelling benefits in a hybrid solution where IP and traditional wired doors are required. Embedded lock power is provided through PoE (Power over Ethernet) for further installation savings (primary port only).

Visit our webpage for more information.